Home > Blend Polyols >

REACH Certified Polyurethane Isocyanate for Wall and Roof Spray Foam in Liquid Form

Product Categories

Blend Polyols [106]
Grouting Materials [19]
Polyurethane Waterproof Coating [10]
Universal Seat Slider [1]
Poly Polyol & Polymer Polyol [26]
Polymeric MDI [41]
Toluene Diisocyanate TDI [10]
Polyurethane Silicone [13]
Polyurethane Catalyst [36]
Color Paste [19]
Dichloromethane [1]
Polyurethane Spray And Grouting Machine [20]
Dipropylene Glycol [2]
Propylene Glycol [1]
Pharmaceutical Intermediate [2]
Manganese Dioxide [19]
Lift And Elevator [1]

Vida New Material Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

REACH Certified Polyurethane Isocyanate for Wall and Roof Spray Foam in Liquid Form

Ask Lasest Price
Supply Ability :	10000 Tons/Year
Certification :	REACH
Price :	Negotiable
Delivery Time :	Peak Season Lead Time: within 15 workdays, Off Season Lead Time: within 15 workdays
Payment Terms :	T/T, L/C

Add to Cart

Product Details
Company Profile

REACH Certified Polyurethane Isocyanate for Wall and Roof Spray Foam in Liquid Form

General Properties and Applications Desmodur ® 44V20L is a dark-brown, liquid blend of diphenylmethane-4,4'-diisocyanate (MDI) with isomer and homologues of

higher functionality. It is used in conjunction with polyols to produce rigid polyurethanes foam.

Sampling

Moisture access must be prevented when taking product samples

Specification property	Value	Unit of measurement	Method
NCO content	30.50-32.50	% by wt.	MDI-01-01
Viscosity at 25ºC	160.0-240.0	mPa.s	MDI-01-02
Acidity(HCL)	≤ 200	mg/kg	MDI-01-03

Other Data Property	Value	Unit of measurement	Method
Density at 20ºC	approx. 1.2.3	g/cm3	DIN51757
Phenyl Isocyanate content	≤50	ppm	2011-0489801-95
Specific Heat(cp)	approx.1.51	kJ/kg.K
Coefficient of thermal expansion	6.59X10-4	K-1

*These values provide general information and are not part of the product specification
Packaging Drums,IBCs,tank containers and tank wagons
Storage Recommended storage temperature:+10 to +30ºC, storage stability(ex works): 6 months if stored in moisture-tight drums

Desmodur ® 44V20L may undergo partial crystallization at temperatures below 00C.The product can ,however, be brought back into the liquid state

by heating the entire contents of the drum for short time to a maximum of 700C, although this may lead to an increase in the solids content.Drums

- including empty ones-should always be kept tightly sealed. The product should never be allowed to come into contact with water,which reacts

with Desmodur ® 44V20L to form polyureas and carbon dioxide. Contact with water in any form (damp drums, solvents containing water, moist

air)must be prevented not only during storage, but also when removing material from drum and during processing. Failure to do so may lead to a dangerous build-up of pressure in tanks and drums due to the generation of carbon dioxide. In addition, polyureas forming in Desmodur ® 44V20L can cause solids to separate out, leading to blockages in the filters, pumps and pipelines of the processing equipment and resulting in production problems

Polyurethane Isocyanate Polymeric Mdi for Spray Foam in Construction in Wall and Roof

REACH Certified Polyurethane Isocyanate for Wall and Roof Spray Foam in Liquid Form

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Vida New Material Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Blend Polyols products from this supplier

Find Similar Products By Category:

Chemicals

Hot Searches: